Spacemaker Controller

Approx. Rs 7,000 / PieceGet Latest Price

• Supply Voltage: 230 V AC, 50 Hz  15% separate for each A/C.
• Power Contact Rating: 30 A at 230 V AC for Compressor Outputs Alarm Contact rating 5 A at 250 V AC for Alarm Potential Free Outputs(C, N ,O).
• Temperature Sensor: Thermistor Sensor NTC 10K@25C Metal body with clamp. Sensor Cable Length: 2.75 meters.
• Temperature Sensing Range:0.0C to 55.0 C
• Resolution: 1V for Voltage, 0.1 A for Current & 0.1C for Temperature.
• Auto/ Controller Bypass Switch: To bypass the controller i.e. A/C1 & A/C2 will remain ON continuously if both the switches are in ON Condition
• Indications: 
  1] Supply ON for A/C1 & A/C2. Colour: Yellow
  2] Auto mode for A/C1 & A/C2 Colour: Green.
  3] Manual Mode for A/C1 & A/C2 Colour: Red.
  4] A/C ON for A/C1 & A/C2 Colour: Green.
  5] Fault for A/C1 & A/C2 Colour: Red.
  6] Room Temperature High: Colour: Red.
  7] Healthy: Colour: Green.

• For Acc-10-02 (3P) Three Phase


• Technical Specifications:
  1] Supply Voltage : 3 Phase 415 V AC, 50 Hz +/- 15% separate for each A/C.
  2] Contact Rating: 9 A, 3 Phase contactor for Compressor Live Outputs
      and 5 A at 250 V AC for Alarm Potential Free Outputs (C,N/O)
  3] Temperature Sensor: Thermistor Sensor NTC 10K@25 C Metal body with clamp.
     Sensor Cable Length: 2.75 meters
  4] Temperature Sensing Range: 0.0 C to 55.0 C
  5] Resolution : 1V for Voltage, 0.1 A for Current & 0.1 C for temperature.
  6]Auto/Controller Bypass Switch: To bypass the controller i.e. A/C1 & A/C2 will
      remain ON continuously if both the switches are in ON condition.
  7] Indications: 
     a] Supply ON for A/C1 & A/C2. Colour: Yellow
     b] Auto Mode for A/C1 & A/C2 Colour: Green
     c] Manual Mode for A/C1 & A/C2 Colour: Red
     d] AC ON for A/C1 & A/C2 Colour: Green
     e] Fault for for A/C1 & A/C2 Colour: Red
     f] Room High Colour: Red
     g] Healthy Colour: Green
  8] Keys: 4 key keypad for settings.
     a] SET Key : To enter into SET Mode/To view the next set point
     b] Up Arrow Key : To increment the set point/To view next menu/To view next setpoint in VEW menu.
     c] Down Arrow Key: To decrement the set point/To view previous menu/To view previous set point in VEW menu.
     d] ENTER Key: To come out of SET mode/To enter into menu/To accept the password
  9] Mounting : Flush mounting

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)